It is currently Sun May 09, 2021 11:19 am

All times are UTC





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: US Spec P750 Weber Recalibration
PostPosted: Tue May 04, 2021 6:08 pm 
Offline

Joined: Tue May 04, 2021 1:25 pm
Posts: 4
Location: USA
model: 750 Paso
year: 1988
I know that this is a well worn subject, but I have not seen a report of successfully recalibrating the originally equipped Weber carburetor on a US spec P750 model. I have gotten mine to run very well using only currently available Weber jets and parts, with no soldering or drilling of emulsion tube holes. I thought this might be useful information or at least another data point for others.

Mine is a standard 1988 US specification P750 with the originally equipped mufflers, airbox and air filter element. Here are the changes from the original calibration:

main jet changed from 145 to 150
idle jet changed from 55 to 60
auxiliary venturi changed from 3.5 to 4.5 (Weber part number 71102.450 w/tube height identical to original, not the extra tall version)
plastic float set to 43mm height
fuel pressure set to 2.5psi
All other jets and settings are per original US spec.

Before making the changes, I suffered the same complaints as most other Paso owners; hesitation and flat power on acceleration at 2500 RPM and while cruising from 4000 to 6500 RPM. Now, once warmed up, the bike runs as well as any carbureted motorcycle I have had. Gerhard has reminded me that the US spec P750s have more restrictive mufflers than Euro models and that the US P750 carburetor has a 34mm venturi vs. 36mm for the Euro model. Therefore, my calibration may be useful only for US spec P750s.


Top
 Profile  
Reply with quote  
 Post subject: Re: US Spec P750 Weber Recalibration
PostPosted: Wed May 05, 2021 2:22 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5427
Location: southern Germany
model: 750 Paso
year: 1987
Thanks for the info :thumbup:

Quote:
and that the US P750 carburetor has a 34mm venturi vs. 36mm for the Euro model

That I didn't say to you. ;) However I posted that info a while back as that is what the parts manual states. Not entirely sure that this info is correct as mine is a US bike with the 44 DCNF 110 and it has a 36 venturi. But who knows if one of the past owners changed it.


Top
 Profile  
Reply with quote  
 Post subject: Re: US Spec P750 Weber Recalibration
PostPosted: Wed May 05, 2021 2:58 pm 
Offline

Joined: Tue May 04, 2021 1:25 pm
Posts: 4
Location: USA
model: 750 Paso
year: 1988
Thank you, Gerhard, , I thought the differences between US and Euro spec carbs were the jet and venturi sizes. My venturi definitely measures 34mm ID, though I don't remember what number is stamped into the carb body.
The unreliable nature of printed specifications is why I refer to such information as merely "data points".


Last edited by Mike's bikes on Sat May 08, 2021 6:44 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: US Spec P750 Weber Recalibration
PostPosted: Fri May 07, 2021 3:35 pm 
Offline
User avatar

Joined: Fri Jul 24, 2015 11:21 am
Posts: 261
Location: Belgium
model: 750 Paso
year: 1989
Hi Mike,

1 question: which emulsion tubes does yours have?

Frank

_________________
Bimota SB4-S - 1984
Ducati Paso 750 - 1989
Suzuki SV1000S - 2008
Ducati Monster 796 abs - 2010


Top
 Profile  
Reply with quote  
 Post subject: Re: US Spec P750 Weber Recalibration
PostPosted: Fri May 07, 2021 6:23 pm 
Offline

Joined: Wed Jun 24, 2020 6:27 pm
Posts: 28
Location: USA
model: 750 Paso
year: 1988
Thanks for posting the info. I read Romus and Higgy's writeup and using the tall 4.5 venturi, interesting that you've apparently had good success using the "standard" 4.5, which is readily available, whereas the tall 4.5 is not, at least near as I can find. I'd really like to see if I can get my '88 Paso working on the original Weber. It's set up with 38mm Mikuni TM-style flat slides right now, and while they seem to be OK, I'd like to return the bike to stock. From everything I'm reading, it appears more than possible to get the Weber to work properly.

_________________
1973 BMW R75/5
1974 Laverda SF2
1976 Suzuki GT185
1983 Lavarda RGS 1000
1988 Ducati Paso 750
1995 BMW K75


Top
 Profile  
Reply with quote  
 Post subject: Re: US Spec P750 Weber Recalibration
PostPosted: Fri May 07, 2021 7:19 pm 
Offline

Joined: Tue May 04, 2021 1:25 pm
Posts: 4
Location: USA
model: 750 Paso
year: 1988
Frank.61 wrote:
Hi Mike,

1 question: which emulsion tubes does yours have?

Frank


F44 emulsion tubes


Top
 Profile  
Reply with quote  
 Post subject: Re: US Spec P750 Weber Recalibration
PostPosted: Fri May 07, 2021 7:37 pm 
Offline

Joined: Tue May 04, 2021 1:25 pm
Posts: 4
Location: USA
model: 750 Paso
year: 1988
murphus wrote:
Thanks for posting the info. I read Romus and Higgy's writeup and using the tall 4.5 venturi, interesting that you've apparently had good success using the "standard" 4.5, which is readily available, whereas the tall 4.5 is not, at least near as I can find. I'd really like to see if I can get my '88 Paso working on the original Weber. It's set up with 38mm Mikuni TM-style flat slides right now, and while they seem to be OK, I'd like to return the bike to stock. From everything I'm reading, it appears more than possible to get the Weber to work properly.


I was not able to find the extra tall 4.5 auxiliary venturi but the "tall" version, matching the original tube height, was available through Redline and seems to have done the job. I did not try changing only the jets with the original 3.5 venturi as I believe that path had been tried without satisfaction by others. Having said that, now flushed with success I might try just the jet changes first.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


cron