Hi all,
I was refitting my clutch master cylinder on my 907 this morning after having fitted a rebuild kit to it and on re-assembly i somehow managed to snap the 90 degree bend off the choke assembly
The round disk with the "choke" writing on is ok its the bit that fastens on to the master cylinder with 2 little screws that i need.
Anyone breaking/ parting out a bike and have this part ?
I will pay you whatever you want just to get her back together again.
By the way is it the same choke set up on paso's and 906's ??
Thanks
907 choke lever assembly needed
- Finnpaso
- paso grand pooh-bah
- Posts: 3090
- Joined: Mon Jul 26, 2004 12:00 am
- year: 0
- Location: Finland
Re: 907 choke lever assembly needed
Remembering, that also early Monster(and maybe SS) use same choke lever system, so it should not be so difficult to find used one cheaply from markets...
Antti http://www.youtube.com/watch?v=HeKOh3XoXPg&NR=1
KTM 990 Adventure -08 metal dark grey
Paso 750 -89 red/metal grey
907IE -91 red/metal grey
907IE -91 red
2xST4S -02 red/metal grey
ST2 -01 red/metal grey
Volvo V70 Bi-Fuel Classic/titanium
KTM 990 Adventure -08 metal dark grey
Paso 750 -89 red/metal grey
907IE -91 red/metal grey
907IE -91 red
2xST4S -02 red/metal grey
ST2 -01 red/metal grey
Volvo V70 Bi-Fuel Classic/titanium
Re: 907 choke lever assembly needed
Thanks Finnpaso, I saw one on ebay from greece with a buy it now, as i was'nt sure if they were difficult to get hold of or not, i bought it.
Its from a 750 paso and looks the same from the picture, I'm just hoping it is the same when it arrives.
I'll keep you posted unless anyone can confirm they are the same,
thanks again.
Its from a 750 paso and looks the same from the picture, I'm just hoping it is the same when it arrives.
I'll keep you posted unless anyone can confirm they are the same,
thanks again.
-
- paso grand pooh-bah
- Posts: 1527
- Joined: Thu Jun 21, 2007 12:00 am
- model: 907 I.E.
- year: 1991
- Location: Gothenburg, SWEDEN
Re: 907 choke lever assembly needed
+1 on finnpasos advice.
Gert
907 I.E. -91
M900 -97
MTS 1100s -07
907 I.E. -91
M900 -97
MTS 1100s -07
- persempre907
- paso grand pooh-bah
- Posts: 3312
- Joined: Tue Dec 06, 2005 12:00 am
- model: 907 I.E.
- year: 1992
- Location: Roma, Italia
Re: 907 choke lever assembly needed
Really, I bought a new choke lever from Ducati dealer (the red written of mine was faded ).
I paid it 6 or 7 Euros, I can't well remember.
As Antti said, the same lever has been fitted on many Italian bikes of that age, so it's easy to find it.
Ciao
I paid it 6 or 7 Euros, I can't well remember.
As Antti said, the same lever has been fitted on many Italian bikes of that age, so it's easy to find it.
Ciao
Francesco
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
Re: 907 choke lever assembly needed
Thanks persempre907. I'll have a look into it,
Its not the choke lever i need its the bit it fastens to that screws to the clutch cylinder.
Its not the choke lever i need its the bit it fastens to that screws to the clutch cylinder.
- persempre907
- paso grand pooh-bah
- Posts: 3312
- Joined: Tue Dec 06, 2005 12:00 am
- model: 907 I.E.
- year: 1992
- Location: Roma, Italia
Re: 907 choke lever assembly needed
I was meaning the whole assembly, part number 036154120, not only the lever.holla wrote:Thanks persempre907. I'll have a look into it,
Its not the choke lever i need its the bit it fastens to that screws to the clutch cylinder.
Ciao
Francesco
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
Re: 907 choke lever assembly needed
I have used the current model of the Domino choke lever as supplied originally on the 907:
The only diference is that you need longer screws for mounting to the clutch master cyl than the stock lever and it actually rotates toward you to apply the choke. Otherwise it is a direct fit.
It is Domino #2903.86 and is available from:
Allens Performance Ltd
Unit B9
Moorbridge Road
Bingham
Notts
NG13 8GG
Tel: 01949 836733
Fax: 01949 836734
http://www.allensperformance.co.uk/products-levers.html
The only diference is that you need longer screws for mounting to the clutch master cyl than the stock lever and it actually rotates toward you to apply the choke. Otherwise it is a direct fit.
It is Domino #2903.86 and is available from:
Allens Performance Ltd
Unit B9
Moorbridge Road
Bingham
Notts
NG13 8GG
Tel: 01949 836733
Fax: 01949 836734
http://www.allensperformance.co.uk/products-levers.html
'91 907ie
'96 900 SS SP
'97 900 SS CR (for sale)
'74 750 GT (since new - sort of)
'85 Pantah 600 (sold, but not forgotten)
'96 900 SS SP
'97 900 SS CR (for sale)
'74 750 GT (since new - sort of)
'85 Pantah 600 (sold, but not forgotten)