Page 1 of 1
Front Forks Pressure
Posted: Sun May 22, 2005 5:04 pm
by 4away
Hi,
Could anyone advise me on the air correct pressure to put in the front forks of a 750 paso for best handling.
Thanks,
Al
(4away)
Posted: Sun May 22, 2005 7:55 pm
by Finnpaso
There SHOULD be atmosphere air pressure inside front fork!!!! Never put higher pressure inside from top valves!!!!!
Those top valves are, that U can take pressure out from forks, cause small amount of air flow via "slider bearings" to inside forks and it should NOT BE THERE.
Finnpaso
907IE
750 Paso
Posted: Sun May 22, 2005 11:16 pm
by jcslocum
No air in the forks.
I find that the handling is very sensitive to air pressure in the tires. The front in particular. I'm at 36 in the back and 35 in the front.
Posted: Mon May 23, 2005 2:46 pm
by Christian
The front air pressure could be use for short time race if the fork woud be not enougth hard !
Posted: Mon May 23, 2005 5:50 pm
by fasterdammit
jcslocum wrote:No air in the forks.
I find that the handling is very sensitive to air pressure in the tires. The front in particular. I'm at 36 in the back and 35 in the front.
Really? On the frame, it specifies different tire pressures - like 37 rear and 34 front or something. I don't remember off the top of my head ... haveta to look & see. That's what I'm running on the Metzler A59s ...
Posted: Mon May 23, 2005 6:05 pm
by jcslocum
Yes, it really does make a difference.....to me. YMMV