750 Sport restoration project

discussion about the 750 Sport and '89/'90 900SS, which share many mechanicals with the Paso series
Mc tool
paso grand pooh-bah
Posts: 1874
Joined: Wed Dec 05, 2007 12:35 am
model: 906 Paso
year: 1990
Location: Newzealand

Re: 750 Sport restoration project

Post by Mc tool »

Make sure the brake pads are not juggling about in the caliper, my R80 had a clunk over sharp bumps and it was the pads . Put a finger on the brake lever and see if the noise goes away :)
Could also be the forks topping out (R80 did that too )
I wish I was young again............Id be heaps smarter than last time
Andrew2
paso grand pooh-bah
Posts: 574
Joined: Thu Oct 27, 2011 7:47 am
model: 750 Sport
year: 1988
Location: Wollongong,Australia

Re: 750 Sport restoration project

Post by Andrew2 »

Thanks,
I tried that by riding with the brakes slightly on and it still did it.

I considered the forks topping out but it's doing it on much smaller bumps than those that would top the forks out. The fork tubes are pitted and I cleaned them up with some wet and dry until I can get them rechromed and expected them to leak badly but they're hardly weeping at all so I'm wondering if there's very little oil in them. Saying that though, they aren't pogoing like you would expect from forks with no damping. Maybe it's just a noisy front end :lol: . I'ts not stopping me riding it. It's just like that annoying rattle in your car that you have to find :lol: :lol: .
*MB
Posts: 7
Joined: Wed Aug 28, 2013 12:34 am
model: 750 Sport
year: 1989
Location: New Zealand

Re: 750 Sport restoration project

Post by *MB »

Hi Andrew,

Try removing the front guard (fender) and ride over an area where you typically get the dreaded clunking noise. I experienced a similar clunking noise when hitting the occasional bumps... I found the front guard flexes easily and judging from wear marks hits at the lower aspect on the each fork leg. Note I achieved similar quietening results if I added a thin rubber pad between the guard and the fork leg.

Cheers,

Marc
Andrew2
paso grand pooh-bah
Posts: 574
Joined: Thu Oct 27, 2011 7:47 am
model: 750 Sport
year: 1988
Location: Wollongong,Australia

Re: 750 Sport restoration project

Post by Andrew2 »

Thanks Marc, appreciate that.

I'll have a look this week as we're expecting a bit of rain so I should have some quality shed time :thumbup: .
Andrew2
paso grand pooh-bah
Posts: 574
Joined: Thu Oct 27, 2011 7:47 am
model: 750 Sport
year: 1988
Location: Wollongong,Australia

Re: 750 Sport restoration project

Post by Andrew2 »

I haven't done a lot to the Sport lately but I did add some new mirrors. I did want to replace the Napolean mirror with another new pair but at $90 each it seemed a bit expensive for now.
Image

We have had a lot of rain lately and I can't get the bike out of the garage so as yet they are untested. You can see how wet the back yard is in this photo.
Image
Image
HIGHWAY89
paso grand pooh-bah
Posts: 637
Joined: Sat Jul 16, 2016 6:35 am
model: 900 SS
year: 1989
Location: Australia

Re: 750 Sport restoration project

Post by HIGHWAY89 »

The mirrors look good and should be a pretty stable view I guess, I'm not sure if the original setup mirrors are vibratey or not as not really having that experience yet, looks like you won't need to water ya lawn for a while, the bikes looking sweet.
Andrew2
paso grand pooh-bah
Posts: 574
Joined: Thu Oct 27, 2011 7:47 am
model: 750 Sport
year: 1988
Location: Wollongong,Australia

Re: 750 Sport restoration project

Post by Andrew2 »

I didn't get the original mirrors with the bike. I'm not even sure what they look like but these will have to do for now. How's your bike coming along?.
HIGHWAY89
paso grand pooh-bah
Posts: 637
Joined: Sat Jul 16, 2016 6:35 am
model: 900 SS
year: 1989
Location: Australia

Re: 750 Sport restoration project

Post by HIGHWAY89 »

Cheers Andrew, I got the 89 back and all sing and dance no problems mechanically, sadly mum slipped away a few days ago so nothing's happening on the bike for a little while.
Andrew2
paso grand pooh-bah
Posts: 574
Joined: Thu Oct 27, 2011 7:47 am
model: 750 Sport
year: 1988
Location: Wollongong,Australia

Re: 750 Sport restoration project

Post by Andrew2 »

Mate, I'm really sorry to hear that sad news. Condolences from my family and I.
HIGHWAY89
paso grand pooh-bah
Posts: 637
Joined: Sat Jul 16, 2016 6:35 am
model: 900 SS
year: 1989
Location: Australia

Re: 750 Sport restoration project

Post by HIGHWAY89 »

Thanks mate, mum was a rider back in her early years so I'm sure she'll be ok if I get back to the ducati in a couple of weeks, cheers Andrew.
Andrew2
paso grand pooh-bah
Posts: 574
Joined: Thu Oct 27, 2011 7:47 am
model: 750 Sport
year: 1988
Location: Wollongong,Australia

Re: 750 Sport restoration project

Post by Andrew2 »

I'm sure she would want that.
HIGHWAY89
paso grand pooh-bah
Posts: 637
Joined: Sat Jul 16, 2016 6:35 am
model: 900 SS
year: 1989
Location: Australia

Re: 750 Sport restoration project

Post by HIGHWAY89 »

Going to start preparing myshed to paint her soon, bit of a hiatus on that one but keen to start again
Andrew2
paso grand pooh-bah
Posts: 574
Joined: Thu Oct 27, 2011 7:47 am
model: 750 Sport
year: 1988
Location: Wollongong,Australia

Re: 750 Sport restoration project

Post by Andrew2 »

Good to hear.

How are you travelling mate?.
HIGHWAY89
paso grand pooh-bah
Posts: 637
Joined: Sat Jul 16, 2016 6:35 am
model: 900 SS
year: 1989
Location: Australia

Re: 750 Sport restoration project

Post by HIGHWAY89 »

Yeah good now mate, been a tough couple years but I'm no orphan there.Im in my shed now working on how to get into this painting, preferably I'd do it in summer but it's gone on too long and now I'm expecting to be called in for 2 x shoulder surgery! Delayed by covid and hospital overloaded stuff. I'd like to do it before the surgery plus I'm in the process of purchasing my new toy which I don't want extra dust and overspray on .And this one won't fit in the loungeroom waha.
HIGHWAY89
paso grand pooh-bah
Posts: 637
Joined: Sat Jul 16, 2016 6:35 am
model: 900 SS
year: 1989
Location: Australia

Re: 750 Sport restoration project

Post by HIGHWAY89 »

I know we should stick with the subject , ducatis , but can't help myself , so I'll post a pic
IMG_01062022_143516_(1024_x_768_pixel).jpg
IMG_01062022_143516_(1024_x_768_pixel).jpg (159.33 KiB) Viewed 35941 times
Post Reply