EBC front brake rotors

redrubberhead · Post by **redrubberhead** » Fri Sep 28, 2007 11:01 am

I am a new member and would like to say hello to fellow 907IE and all other Ducati fans. I am the original owner of a '91 907IE and I still love it. The front grakes have had a pulsation and I hear a clicking from the front pads at low speeds. I am considering changing out the rotors and pads. Has anyone used the EBC Pro-Lite or the new design Contour rotors? I am considering the EBC kevlar pads as well. I use the bike for Sunday rides and sport touring. Any help would be greatly appreciated.

Thanks in advance, Jon

Finnpaso · Post by **Finnpaso** » Fri Sep 28, 2007 12:18 pm

At least cant find anymore those original 300mm rotors from Ducati dealer. Does 320mm rotors need adopters to fit 91 modell black coloured Brembos????

Tamburinifan · Post by **Tamburinifan** » Fri Sep 28, 2007 12:56 pm

Has anyone used the rotors?

Has 300 mm EBC Pro-Lite Contour discs & 2pin gold 4 piston Brembo´s w EBC HH pads on my Monster.
Very happy! Progressive feel and really stops when you want it!

No wave for 907 but ProLite here:
http://www.motorcycle-road-and-race.co. ... mage1.y=15

Does 320mm rotors need adopters to fit 91 modell black coloured Brembos????

Pretty sure they will need adaptors.
Biscaya here in Sweden has 3 brand new M1R forks for 320 mm discs for sale!

tewsy · Post by **tewsy** » Fri Sep 28, 2007 9:35 pm

I have wave rotors front and rear on my 91 907,got them at http://www.chaingang.com.au cost was $590aud,only thing was had to send rotors and centres down so they replaced rotors on original centres,was told rear rotor is same as a certain yamaha model but can't remember which model.

persempre907 · Post by **persempre907** » Sat Sep 29, 2007 7:17 pm

I had the same issue, so I bought a couple of full floater Brembo rotors (€. 440).

Besides, a newer style Brembo 4 pistons calipers and a radial 999's master cylinder.
REALLY HAPPY :lick: :lick: :lick: .
Ciao

Finnpaso · Post by **Finnpaso** » Sat Sep 29, 2007 8:09 pm

Might that foto be from some 900SS ????

persempre907 · Post by **persempre907** » Sun Sep 30, 2007 7:21 am

Finnpaso wrote:Might that foto be from some 900SS ????

Yes, I do :funny: :funny: :funny: . Or, perhaps, from some 851/888 .
But the rotors and the calipers have the same shape (even if I have the 300 mm. ones) and I was too much lazy to put the "real" photo on Internet :funny: :funny: :funny: :funny: .
Ciao

Finnpaso · Post by **Finnpaso** » Sun Sep 30, 2007 10:58 am

Yes, it can be also 851/888. What is that nut system in fork? Is it oil change nut, or some adjusting knob? Cant remember such in those upside down forks...

Tamburinifan · Post by **Tamburinifan** » Sun Sep 30, 2007 1:09 pm

Code: Select all

What is that nut system in fork?[quote]

Compression damping adjustment.[/quote]

Tamburinifan · Post by **Tamburinifan** » Sun Sep 30, 2007 1:11 pm

[quote]What is that nut system in fork?[quote]

Compression damping adjustment.

Finnpaso · Post by **Finnpaso** » Sun Sep 30, 2007 5:49 pm

In my ST4S that compression damping adjustment is in totally different place...

Gert, from what modell that fork is?

Tamburinifan · Post by **Tamburinifan** » Sun Sep 30, 2007 8:34 pm

Not sure, but guessing older US 916/748.