To loose one's temper...

DuC-MaN · Post by **DuC-MaN** » Sun May 08, 2005 10:38 pm

Now I know why the Paso has two bulbs for the tail light...

It takes ages to get the plastic housing of without breaking it in pieces...

After taking a deep breath I finally got it off... it looks like those black pieces which separate the orange and red (euro tail light) are the cause of my struggle... Maybe I should glue those things to the housing...

Haven't tried to get to the headlight yet, i saw that the previous owner (or dealer) has tie-rapped all wiring in front of the space where you should try to get the bulb out of the housing... :toofar:

Be prepared!

Duck01 · Post by **Duck01** » Mon May 16, 2005 11:42 am

Have done the headlight bulb on mine recently. So long as you have the fingers of a under-fed concert pianoist - you'll have no problems..................
Or - if you're like me - it'll involve lots of swearing...........

DucSoup · Post by **DucSoup** » Mon May 16, 2005 5:26 pm

I had no problem replacing mine. Now that I have the body panels off and can see what is up in there I think maybe I was just lucky. Not a whole lot of room. If you have the time, take off the right side panels and you will at least be able to see where your hands are going - that should help some.

Duck01 · Post by **Duck01** » Mon May 16, 2005 9:05 pm

Had to replace mine on a garage forecourt, so only took the top fairing off................. :thumbdown: