907ie Hoses

englishstiv · Post by **englishstiv** » Tue Feb 17, 2009 10:29 am

Anyone tried these or know if they will fit? I know they are from an 851 but there could be a chance to mix and match or does anyone know where I can get a similiar set elswhere in the world?

http://cgi.ebay.co.uk/DUCATI-851-1992-S ... 240%3A1318

Tamburinifan · Post by **Tamburinifan** » Tue Feb 17, 2009 11:38 am

Maybe a mix of 851 or ST2 & custom made will do it?
http://www.sporthoses.com/kits/bike/ducati/1904
http://www.sporthoses.com/parts/
http://www.desmotimes.com/product28.htm

englishstiv · Post by **englishstiv** » Tue Feb 17, 2009 12:35 pm

Some good links there, many thanks > especially sporthoses.com

Shelboss · Post by **Shelboss** » Sat Feb 21, 2009 10:29 pm

It's too bad Sport Hoses doesn't make the T pieces in motorcycle sizes! If you do the coolant tank modification and use the Superflex hoses elsewhere, then the only challenge is the junction between the cylinders and the thermostat-to-radiator that Ducati does in the hose. This could be an aluminum block with 4 brass barbed fittings screwed into it. Mine is still in good condition, so this is not a priority yet.

englishstiv · Post by **englishstiv** » Sat Feb 21, 2009 10:55 pm

What is really annoying is that I have sent them a detailed email and they haven't even bothered to reply so looks like they are not interested in my business from this side of the world.

higgy · Post by **higgy** » Sat Feb 21, 2009 11:53 pm

keep in mind a lot of these small outfits are only in biz to support their racing efforts and they are all very busy this time of year

englishstiv · Post by **englishstiv** » Wed Feb 25, 2009 11:25 pm

Have had a reply folks

"Samco doesn't offer a kit for your application. However you might have some luck building a kit from the race parts section of the website. We can ship to England however it will probably be less expensive if you contact a Samco dealer over in england. Let me know if you have anymore questions."

Just out of curosity anyone able to give me an idea on cost over in the states for a full system for the 851 as at the top of my thread?

Post by **jcslocum** » Thu Feb 26, 2009 12:28 am

Would this help??

http://www.frontiernet.net/~jcslocum/Du ... nk_Mod.pdf

Right click and download to your computer. it's 1.2 Mb

englishstiv · Post by **englishstiv** » Thu Feb 26, 2009 12:49 am

Jon I am running Vista and the file shows as "being damaged and cannot be repaired" should I try an XP system to read?

Tamburinifan · Post by **Tamburinifan** » Thu Feb 26, 2009 1:01 am

Same here w XP, "damaged-unrepairable".

Post by **jcslocum** » Thu Feb 26, 2009 2:14 am

Hmmmmmm Lemme look at it and upload again. It's just a PDF.

Try it again. It didn't fully upload when I did it last time. Sorry about that.

higgy · Post by **higgy** » Thu Feb 26, 2009 11:24 am

Works now Jon

Tamburinifan · Post by **Tamburinifan** » Thu Feb 26, 2009 11:27 am

Works!

persempre907 · Post by **persempre907** » Thu Feb 26, 2009 11:42 am

Works on my PC, too.
Ciao

englishstiv · Post by **englishstiv** » Thu Feb 26, 2009 8:24 pm

Thank you does for me too

907ie Hoses

907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses

Re: 907ie Hoses