907IE 91 to 93

trevor · Post by **trevor** » Fri Dec 04, 2009 10:04 pm

Hi everybody
I have a question re the difference between the 1991 model 907 and the 1993 models, I know the brakes are larger on the 92 on but what other changes were made?

Regards

Trevor

blazing928 · Post by **blazing928** » Fri Dec 04, 2009 10:16 pm

91 brake calipers painted black ----92 changed to gold
92 seat is longer in the driver area, opt grey colour
price went up

trevor · Post by **trevor** » Fri Dec 04, 2009 10:38 pm

Hi Nigel
Thanks for the quick reply, I wasn’t sure what other difference’s their was between the models

Tamburinifan · Post by **Tamburinifan** » Sat Dec 05, 2009 12:58 am

Front brake discs 320mm 1992-93, 300 -91.
Calipers black 91, otherwise same.
Seats same on all Paso-907.

ducinthebay · Post by **ducinthebay** » Sat Dec 05, 2009 2:22 am

The black calipers were 32/32 mm pistons, and the gold ones were 30/32 pistons. They both bolt on the same, and use the same pads.
With the rotor size change, the bottom fork legs were changed to accommodate.

Cheers,

du907 · Post by **du907** » Sat Dec 05, 2009 4:31 am

Also on the earlier model the lower engine block and clutch cover etc. was painted black. The later models where the aluminum color. The exhaust pipes where also fully black.
du907

persempre907 · Post by **persempre907** » Sat Dec 05, 2009 8:00 am

Tamburinifan wrote:Seats same on all Paso-907.

No, the seat of the last 907 was lowered a little bit.
Besides, the mufflers were no more black but covered by an aluminium sheet.

I have both 907s

.
Ciao

du907 · Post by **du907** » Sun Dec 06, 2009 12:15 am

My mistake, typo error. I meant the earlier models mufflers where black along with the entirely black motor . Later models had the alum. cover on the mufflers.

trevor · Post by **trevor** » Mon Dec 07, 2009 7:56 am

Once again thanks for the information, you guys are very helpful

Regards

Trevor

ducinthebay · Post by **ducinthebay** » Tue Dec 08, 2009 2:01 am

Last model of 907 was the first bike that Pierre Terblanche designed for Ducati. Of course he just did a makeover.

persempre907 · Post by **persempre907** » Tue Dec 08, 2009 5:03 am

ducinthebay wrote:Last model of 907 was the first bike that Pierre Terblanche designed for Ducati. Of course he just did a makeover.

??????????????????????????????????????????????????????????????????????????????????????????
DESIGNED?????????????????????????????????????????????????????????????????????????????????
PIERRE TERBLANCHE???????????????????????????????????????????????????????????????????????
??????????????????????????????????????????????????????????????????????????????????????????

The 907 is "only" a modded 906.
She doesn't have an own factory manual, but only a little add to the 906 manual.
What would have done Pierre Terblanche on 907?
As far as I know, he designed the latest MHR and SS series. The Multistrada too, perhaps? I can't remember.

Ciao

Tamburinifan · Post by **Tamburinifan** » Tue Dec 08, 2009 11:54 am

He also did Supermono, 999 & Cagiva Grand Canyon.
He did most of the ST together w Galuzzi.

persempre907 · Post by **persempre907** » Tue Dec 08, 2009 2:50 pm

Nothing on the Paso, though.
I doubt that on 1989 (the first 907 was built on 1989) he already was hired by Ducati.

ducapaso · Post by **ducapaso** » Tue Dec 08, 2009 3:25 pm

persempre907 wrote: She doesn't have an own factory manual,
Ciao

it's interesting to remark that you typed "she" about 907...

persempre907 · Post by **persempre907** » Tue Dec 08, 2009 3:30 pm

Really, in Italy I'd say "he".
But, it seems that "bike" is feminine, so better "she"

.
...Interesting only Italian people...
Ciao

907IE 91 to 93

907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93

Re: 907IE 91 to 93