wiring

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

Post Reply
Rlhanson

wiring

Post by Rlhanson »

basket case paso
installed wiring harness but have no spark when turning over.
plugs spark when ignition key is turned on both at same time.
just once every time key is turned on.
wiring not right ?, failed components?
every thing else seems to work.
Mc tool
paso grand pooh-bah
Posts: 1985
Joined: Wed Dec 05, 2007 12:35 am
model: 906 Paso
year: 1990
Location: Riverton New Zealand

Re: wiring

Post by Mc tool »

sounds to me like you have power to the coils but not to the ECU ,or a fault in the sensor circut . I think that the 750's had a koukusan ignition which was essentially one seperate unit for each pot , and it is unlikely that both units have packed it in at the same time , much more likely to be something both units have in common , like the power supply or the earth
I wish I was young again............Id be heaps smarter than last time
User avatar
persempre907
paso grand pooh-bah
Posts: 3312
Joined: Tue Dec 06, 2005 12:00 am
model: 907 I.E.
year: 1992
Location: Roma, Italia

Re: wiring

Post by persempre907 »

Check the RPM sensor on the flywheel.
I had it broken and the bike used to stop with no spark.
Ciao
Francesco
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
Post Reply