Starter: Nippon Denso 128000-6050 - found online @ $109.95

[Mobius]

I having finally, after 1 week of trying, managed to free the knackered starter from the Paso. I hope there is a special place in hell reserved for the idiots who designed how it is removed from the bike. (Perhaps the Italian Motorcycle Maintenance Workers Union did a really good deal with Ducati at some stage?)

The brushes had disintegrated and shredded the armature. Calling Gowanloch's in Sydney revealed a price of nearly $900 Aussie - or over $1000 delivered to New Zealand.

Some searching online found "Stocker's Starters", and the Nippon Denso 128000-6050 (new) starter motor in their store. They have it in stock as a standard part.

http://www.stockers.com/index.php?dt=DS-101N

Price: US $109.95 on special! (Plus freight)

Not even worth trying to repair even a slightly "iffy" starter at a price like this. Mine should arrive in 10 days.

[fredskidoo]

They also sell a repair kit for $29.95
which includes brushes, brush holder AND bearings !

http://www.stockers.com/index.php?dt=RBK-69

[Mobius]

Starter Motor arrived 6 days after ordering, extremely well packed.

Vendor is thoroughly recommended!

[Tamburinifan]

Thx f sharing, really cheap!

[nnnnnnorman]

cheap? or good value? well foundand thanks

[Mobius]

Good value!

This is the original part from Nippon Denso: not a knock off or alternative starter.

New starter + MotoLectric starter cable upgrade = starts in less than 1 second. Every time!

[907pasonut]

thats not a bad price Mobius...actually its very good, how much is freight to NZ? (it would be similar to Aus)
the add says it fits all ducati 851, and I immagine the 906 and 907 have the same starter as well,
it wouldnt be a bad idea to have a spare...just in case.

[davo]

Hi Mobius, just wondering if you tried to email Stockers with an inquiry before you bought your starter motor.
I`ve been trying to email them through their customer support throughout Dec 2010, but it just bounces back.
In the the end i just placed the order for a starter motor using PayPal.
The shipping automatically came up as about $25.

Is that what you roughly paid for delivery?
I`m just wondering because the shipping seems a bit cheap to me. I`m not complaining, i just think it`s to good to be true and there was a component for overseas shipping that i must have missed maybe?

Kind regards
Davo

[Mc tool]

I got ( in 6 days ) a brembo f09 calipur rebuild kit from Bevel Heaven , somewhere in the states to NZ for $us16 freight

[higgy]

Bevel Heaven is in Cali 4n i a

[Fraser]

Hamish,

Bevelheaven use USPS which is just the local post office, not a courier service. But the service is great, I got a complete Brembo F08 caliper from them a couple of months ago (when I still had the Moto Guzzi), it arrived in 1 week. A bleed nipple had snapped off the caliper, so I tried to remove this with a screw extractor, which then snapped off and then it really turned to custard. Easier to get a new caliper, US$125.00.
Cheers,
Fraser.

[Mc tool]

Hi Fraser , broken bleed nipple huh , wouldnt know nothing 'bout that
I heated , wd 40'd ( prayed ), but it snapped like a twig. I had to drill it out and pick out the threads with a scriber, and it was all going unbelievably well, BUT when it came to the helicoil stage I fucked it up. Somehow ( we all know how !) I didnt get the tap quite straight and when I had finished the point on the nipple didnt line up properly with the nipple seat and wouldnt seal ...... so cap screw and copper washer.
Oh yeah as 2vtwin ( 907 topic ) was talking about his new 907 mufflers needing a spruce up , I thought this would be a brilliant oppertunity to tell him about your wood grain ( nice oak )mufflers Fraser
Hamish

[davo]

Dis-regard my concerns. Starter motor turned up.

Very happy!