Weber 44DCNF 107 accelerator pump.

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

Post Reply
pasoforme
Posts: 21
Joined: Wed Nov 29, 2006 12:00 am
model: 750 Paso
year: 1988
Location: USA

Weber 44DCNF 107 accelerator pump.

Post by pasoforme »

Would anyone know the path for fuel to feed the accelerator pump? After removing the cover the wet side was dry. i've used carb cleaner on both holes in the chamber. I've run the fuel pump, no gas to accel. cavity. I don't think the engine must be running to flow fuel to accel. pump?? Looking at the carb from the left side, with the pump cover off, there are two openings, one at 5 o'clock, about 1/8 " in dia. and onother that is a sorta slot at 11 o'clock. Thanks in advance.
jayh
Posts: 247
Joined: Thu Oct 22, 2009 10:38 am
model: 750 Paso
year: 1986
Location: Mildura ,Australia

Re: Weber 44DCNF 107 accelerator pump.

Post by jayh »

This might help. Jay
Image
pasoforme
Posts: 21
Joined: Wed Nov 29, 2006 12:00 am
model: 750 Paso
year: 1988
Location: USA

Re: Weber 44DCNF 107 accelerator pump.

Post by pasoforme »

Thank you Jay. It appears that I need to look for a ball valve that is inoperative.
Post Reply