Hi!
I have mounted a 12V socket on the black metal piece below the dashboard.
Were is the best point to connect the wires on the front side of the bike?
It does not matter if it is 12 V permanent or not- permanent would be better.
Any idea which plug/ cable I can use for that?
The wiring diagram did not really help me..
Thanks
Gernot
12V Power
- Derek
- paso grand pooh-bah
- Posts: 768
- Joined: Thu Nov 03, 2011 10:13 am
- model: 907 I.E.
- year: 1994
- Location: Scotland
Re: 12V Power
Probably best to tap into the red wire to the regulator. It goes straight back to the battery through the 30A fuse. An inline fuse at a lesser rating of say 10A might be a good idea too. That should be enough to power most accessories and be good for charging the battery too.
1994 907ie
2017 Supersport 939
2015 Scrambler Classic
1982 Pantah 500SL (now sold)
Scotland
2017 Supersport 939
2015 Scrambler Classic
1982 Pantah 500SL (now sold)
Scotland
- blazing928
- Posts: 222
- Joined: Tue Sep 15, 2009 4:08 am
- model: 907 I.E.
- year: 1991
- Location: Melbourne Vic, Australia
Re: 12V Power
I always run a new wire back to the battery, pretty easy to do, add an in line fuse, less chance to affect something else. [EG; my Garmin is hard wired back to the battery]
Nigel
91 907IE - full restoration
91 907IE Red, Wilbers, Staintune Conti, Corbin,
MPL Slipper,Ceramic exhaust
Lambretta LI150 S3
87 928S4
http://www.paolopirozzi.com/it/ - around the world on a Multistrada
907, its not a bike , its a cult
91 907IE - full restoration
91 907IE Red, Wilbers, Staintune Conti, Corbin,
MPL Slipper,Ceramic exhaust
Lambretta LI150 S3
87 928S4
http://www.paolopirozzi.com/it/ - around the world on a Multistrada
907, its not a bike , its a cult