New Paso Owner Here saying HI!

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

Post Reply
User avatar
wilbur
Posts: 70
Joined: Fri Sep 22, 2006 12:00 am
model: 750 Paso
year: 1987
Location: Port Murray, NJ

New Paso Owner Here saying HI!

Post by wilbur »

Hi All,

I recently purchased a 1987 Paso from Vickon, he is a member here. Though I have not picked up the bike yet, I'm pretty excited about it. I bought a brand new Paso back in 1987 and loved the bike. I sold it to buy a 900ss and then eventually sold that to buy my current 99 yellow 996 biposto. So, I'm hoping the bike is still as fun as memory remembers it. Before selling my Paso it had mikuni flat slides and a 2into1 NCR exhaust, euro tail light. It was great!

I've been lurking here for a while gathering information. Great site and look forward to chatting with all.

I will be looking for a euro tail light soon if anybody is selling one.

Thanks,

Tim
User avatar
persempre907
paso grand pooh-bah
Posts: 3312
Joined: Tue Dec 06, 2005 12:00 am
model: 907 I.E.
year: 1992
Location: Roma, Italia

Post by persempre907 »

Hi Wilbur,
you don't have to lurk!!!
Since you have had many Ducks, with your experience you could help who has some trouble.
Ciao
Francesco
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
User avatar
Finnpaso
paso grand pooh-bah
Posts: 3091
Joined: Mon Jul 26, 2004 12:00 am
year: 0
Location: Finland

Post by Finnpaso »

NCR ? :lick: :lick: :lick: :lick: :lick: . i think, U are welcome here! :laugh: :laugh: :laugh: :laugh: :laugh: Btw, i hope, that all knows, what NCR means in Ducatiworld! :lick:
Antti http://www.youtube.com/watch?v=HeKOh3XoXPg&NR=1
KTM 990 Adventure -08 metal dark grey
Paso 750 -89 red/metal grey
907IE -91 red/metal grey
907IE -91 red
2xST4S -02 red/metal grey
ST2 -01 red/metal grey
Volvo V70 Bi-Fuel Classic/titanium
User avatar
Vickon
Posts: 93
Joined: Mon Feb 21, 2005 12:00 am
model: 900 SS
year: 1991
Location: Florida

Welcome T...

Post by Vickon »

Hi wilbur, I hope you are enjoying the Paso as much as I did! :thumbup: The bike has been a great learning experience and a joy to own. Unfortunately, I have too many bikes and a very little garage! So, I wish you the best with my former pride and joy!

Once again, welcome to a great site wilbur! :thumbup:

Best Regards,

Vickon :cool:
User avatar
wilbur
Posts: 70
Joined: Fri Sep 22, 2006 12:00 am
model: 750 Paso
year: 1987
Location: Port Murray, NJ

Post by wilbur »

Vickon...Thanks!

Just a little note on my adventure.

Vickon picked me up at the airport around 1:30pm and we stopped at a tag agency to do the title work. From there went to Vickon's house and saw the bike. Got suited up and we were off about 4:00pm. He escorted me out to the highway on his 900ss. Great looking 900. I rode about 130 miles and hit a thunder storm and road construction. It was dark and raining so decided to call it a night at 8:30pm. Got up the next morning and did about 510 miles from Fort Pierce, FL to Columbia, SC. Really started getting colder the more I rode North. This day I rode from about 8:30am to 5:00pm. I wanted to put in some miles so my last day riding would be minimal. The next day I wake about 8am but don't really have to be on the road right away and besides it is 36 degrees out. So, I wait to about 10:00am so it warms up a bit cause I figured I've only got about 4 hours worth of riding to get to my final destination. Go out and start the bike and it cranks real slow, try push starting but that no work. So, I went looking for jump start. Found someone to jump start the bike, took the seat off and noticed the battery was almost dry. Filled the battery up with some water, jump started and off I went. Another 240 miles later I was where I needed to be, Danville, VA. A friend was meeting me there so we could do a trackday at VIR. Loaded the Paso into the trailer and hauled it back to NJ in comfort.

All is well.

Tim
88WhitePaso750
Posts: 37
Joined: Fri May 14, 2010 12:39 am
model: 750 Paso
year: 1988
Location: USA

Re: New Paso Owner Here saying HI!

Post by 88WhitePaso750 »

I know this thread is old, but what the hell, here I go.

I have a 88 Paso750 with a NCR 2 into 1 along with Mikuni Flatslides. I notice an issue where when I move the bike after it as sat for several days it will dump about 1/4 cup of gas out one of the vent tubes (possible overfill tube). This happens and the rest of the day the bike does not leak any fuel. If it is ridden daily this issue does not reappear. It seam to be ambient heating and cooling cycle. To try and battle this, I just order a set on monster 750 intakes along with a set of monster 750 downdraft carbs.

Do you have any pictures of your Mikuni setup? Any part number for 1 into 2 throttle cable required? My think my fuel leakage may be also a result of the angle of the carbs. I would love to see a photo of someones flatslide setup.

Chris
1978 Yamaha 650 Special
1987 Yamaha FZ600
1993 Suzuki GSX-R 1100
1995 Kawasaki Ninja 250R (wife's)
1988 Ducati Paso 750
2009 Yamaha FZ1
User avatar
higgy
paso grand pooh-bah
Posts: 3377
Joined: Tue Jul 29, 2008 9:50 pm
model: 907 I.E.
year: 1992
Location: Hilltown,Pennsylvania
Contact:

Re: New Paso Owner Here saying HI!

Post by higgy »

This happens and the rest of the day the bike does not leak any fuel. If it is ridden daily this issue does not reappear. It seam to be ambient heating and cooling cycle. To try and battle this, I just order a set on monster 750 intakes along with a set of monster 750 downdraft carbs.

Could be a sticky needle and seat or more likely a tank venting issue forcing fuel out the weakest link,the needle and seat
Guess you have the excuse you had been looking for to spring for the new setup :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Still I'd check your tank for an issue since it will stlll be there with the new setup :twisted:
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
Electrocuted Birds Are Bursting Into Flames and Starting Wildfires :roll:
88 750
90 906
92 907ie
Mc tool
paso grand pooh-bah
Posts: 1974
Joined: Wed Dec 05, 2007 12:35 am
model: 906 Paso
year: 1990
Location: Riverton New Zealand

Re: New Paso Owner Here saying HI!

Post by Mc tool »

Hi wilbur, welcome. Any one who has multiple ducati's surely belongs here :)
Scuse my ignorance Wilbur( everyone else is used to it :lol: ) , but what is a "euro" tail light ? I am ( slowly ) collecting spare parts and have just scored a tail light assy but am now thinking" ooooh , a euro .... that sounds better ". Probly pay to keep an eye on that battery water , my paso seemed to get thru a lot of battery water untill I twigged and sorted the charging voltage ( was just over 15 v)
I wish I was young again............Id be heaps smarter than last time
User avatar
higgy
paso grand pooh-bah
Posts: 3377
Joined: Tue Jul 29, 2008 9:50 pm
model: 907 I.E.
year: 1992
Location: Hilltown,Pennsylvania
Contact:

Re: New Paso Owner Here saying HI!

Post by higgy »

Image
the much ballyhooied euro tail light assembly,illegal most everywhere else in the world not that many seem to care :thumbup:
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
Electrocuted Birds Are Bursting Into Flames and Starting Wildfires :roll:
88 750
90 906
92 907ie
Mc tool
paso grand pooh-bah
Posts: 1974
Joined: Wed Dec 05, 2007 12:35 am
model: 906 Paso
year: 1990
Location: Riverton New Zealand

Re: New Paso Owner Here saying HI!

Post by Mc tool »

Thanks Higgy , I actually have 3 of them ( inc the one on the bike ) so Ill have a look see what the others are like , Thanks
I wish I was young again............Id be heaps smarter than last time
Post Reply