1. A brand new starter which has never been mounted
2. Brand new Barnett clutch set (friction plates)
3. Yamaha FZ 750 Headlight
4. 36mm Dell'Ortos
5. European headlight switch
There is one small catch - I want to sell the whole lot, and a 1987 Paso 750 with them (too many toys and too many projects).
The Paso currently has the Dell'Ortos on it and the Euro left handlebar pod.
It runs well but needs a valve job (worn valve guide on vertical exhaust). The engine has VeeTwo performance (not racing) cams.
It also has an FZR1000 front wheel and rotors, Suzuki Katana rear wheel (5.5" wide).
The bodywork is not pretty (currently in primer), but the clock works.
I also have a lot of extra parts accumulated over the 20 years I've owned this Paso.
I'd like $1000 for the whole lot.
Located in Northern California
Michael
Paso Shed Sale
-
MichaelJH
Re: Paso Shed Sale
I guess I forgot to add my contact info!
paso750 at gmail dot com
Michael
paso750 at gmail dot com
Michael
-
higgy
- paso grand pooh-bah
- Posts: 3378
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: Paso Shed Sale
any pictures?
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
Electrocuted Birds Are Bursting Into Flames and Starting Wildfires
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
Electrocuted Birds Are Bursting Into Flames and Starting Wildfires
88 750
90 906
92 907ie
-
jcslocum
- paso grand pooh-bah
- Posts: 1714
- Joined: Mon Jul 19, 2004 12:00 am
- model: 750 Paso
- year: 1988
- Location: Eastern Shore, MD
- Contact:
Re: Paso Shed Sale
Can you post pics.... of the shed? :-)
Good luck selling and thanks for not parting.
Good luck selling and thanks for not parting.
-
higgy
- paso grand pooh-bah
- Posts: 3378
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: Paso Shed Sale
Hey Jon,Here's one for ya 
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
Electrocuted Birds Are Bursting Into Flames and Starting Wildfires
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
Electrocuted Birds Are Bursting Into Flames and Starting Wildfires
88 750
90 906
92 907ie
-
MichaelJH
Re: Paso Shed Sale
I'll post some pictures tomorrow.
To correct one item: I realized that the clutch that I thought was new was in fact used. Sorry.
Michael
To correct one item: I realized that the clutch that I thought was new was in fact used. Sorry.
Michael
-
MichaelJH
Re: Paso Shed Sale
Hopefully this works... it took a little longer than I expected.
That's 68,000 and change on the speedo. I had a gearbox added to the speedo cable many years ago to compensate for the new wheel size.
The bodywork's off right now, so I'll add a few more tomorrow (I hope).
I had to make a new headlight switch handle after the original one decided to abandon ship earlier this year.
The stock calipers on Yamaha rotors have plenty of stopping power. I've never needed any more brake than this.
Michael
That's 68,000 and change on the speedo. I had a gearbox added to the speedo cable many years ago to compensate for the new wheel size.
The bodywork's off right now, so I'll add a few more tomorrow (I hope).
I had to make a new headlight switch handle after the original one decided to abandon ship earlier this year.
The stock calipers on Yamaha rotors have plenty of stopping power. I've never needed any more brake than this.
Michael