Page 1 of 3
Rear Swingarm for 907 needed!
Posted: Tue Mar 15, 2011 8:17 pm
by JoKing
Hi,
I just recognized, that i need a new swingarm for my 907
Has someone a spare?
I think mine is rubbish... You can already see the steel of the bearing shining through.
This situation makes me very sad, and i hope someone can help me...
Maybe we can make a deal, i have a new US-taillight (complete) and other rare parts. Or cash...
Thanks,
Johannes
Re: Rear Swingarm for 907 needed!
Posted: Wed Mar 16, 2011 12:36 am
by Jaffa
I have a brand new one tucked away under my work bench. They are still available and I am sure I can get one for you here, but of course, there is the shipping cost.
May make it unobtainable.
Re: Rear Swingarm for 907 needed!
Posted: Wed Mar 16, 2011 2:06 am
by higgy
Dude,have it welded up.no big deal
Re: Rear Swingarm for 907 needed!
Posted: Wed Mar 16, 2011 8:15 am
by JoKing
Jaffa wrote:I have a brand new one tucked away under my work bench. They are still available and I am sure I can get one for you here, but of course, there is the shipping cost.
May make it unobtainable.
Would you pleeeeease ask how much the swingarm costs?
The one in ebay looks not nice to me, but could be a fallback-solution .
Re: Rear Swingarm for 907 needed!
Posted: Wed Mar 16, 2011 8:57 am
by Duc750
That will weld up no problem at all
Re: Rear Swingarm for 907 needed!
Posted: Wed Mar 16, 2011 10:05 am
by higgy
Re: Rear Swingarm for 907 needed!
Posted: Wed Mar 16, 2011 4:52 pm
by JoKing
I gave it to the workshop for welding today. And it is a really good workshop:
http://mmkiel.de/
They say it it is NOT easy to weld it, because the wear is so high, that the bearings have been worn, so there are real holes. They have to remove the needle bearings, weld it from the outside and rework the hole for the bearings from the inside.
It won`t be cheap, but i let the swingarm ther for repair... Next week i can get it.
But if someone has a new one, i am still interested.
Re: Rear Swingarm for 907 needed!
Posted: Thu Mar 17, 2011 1:38 am
by Jaffa
I will make some enquiries here and give you a total cost including shipping to Germany.
I am happy to do this and send to you at cost....ie no cost to me. Cost will be in Aus $.
Cheers.
Re: Rear Swingarm for 907 needed!
Posted: Thu Mar 17, 2011 4:32 am
by JoKing
Great! Thanks!
Re: Rear Swingarm for 907 needed!
Posted: Thu Mar 17, 2011 1:02 pm
by JoKing
Another question.
In this picture, you can see steel shining through.
- swingarm.jpg (104.04 KiB) Viewed 6157 times
In the parts catalogue, i can`t find a bushing around the needle bearings.
- SA-Bearing.jpg (34.71 KiB) Viewed 6157 times
Is it part of the swingarm?
Then i have to inform, the welding guys immediately...
Re: Rear Swingarm for 907 needed!
Posted: Thu Mar 17, 2011 5:47 pm
by JoKing
Just met the welding guy.
He is nearly ready.
The steel you see is part of the bearing.
Re: Rear Swingarm for 907 needed!
Posted: Thu Mar 17, 2011 8:58 pm
by Tamburinifan
Do you know why this damage happened?
Re: Rear Swingarm for 907 needed!
Posted: Thu Mar 17, 2011 9:07 pm
by higgy
Looks like chain damage
Re: Rear Swingarm for 907 needed!
Posted: Fri Mar 18, 2011 1:48 am
by Jaffa
higgy wrote:Looks like chain damage
Looks like the left lower side of the swingarm (chain drive side), slack chain???
Re: Rear Swingarm for 907 needed!
Posted: Fri Mar 18, 2011 2:04 am
by Jaffa
JoKing wrote:Jaffa wrote:I have a brand new one tucked away under my work bench. They are still available and I am sure I can get one for you here, but of course, there is the shipping cost.
May make it unobtainable.
Would you pleeeeease ask how much the swingarm costs?
The one in ebay looks not nice to me, but could be a fallback-solution .
PM Johannes.
