ducatipaso.org

Posted: **Wed Jun 03, 2015 6:36 pm**

Any alternative source for the EFI rubber dampers?
Ciao

Posted: **Wed Jun 03, 2015 9:57 pm**

Hi Francesco.

Which one's? The airbox end or the inlet manifold? Or something else?

Cheers.

Nick.

Posted: **Sun Jun 07, 2015 12:28 pm**

The ones down to the ECU. The same are on the plate that supports the relays etc. on the left of the front fairing.
Mine are broken.
Ciao

Posted: **Sun Jun 07, 2015 2:50 pm**

I got some from McMaster Carr. They are called Neoprene Vibration Damping Sandwich Mount, Male/Male, M6 Thread, 1/2" High, 1" Wide

I think in your area http://www.wdsltd.co.uk/product/4070/an ... ed-wds-716

or http://www.misumi-europe.com/en/

should be able to supply what you need

Posted: **Sun Jun 07, 2015 10:57 pm**

As temporary fix cut a piece of fuel pipe to size and pass a nut and bolt through it, simple but it works and costs pennies.

Posted: **Mon Jun 08, 2015 10:58 am**

the silent blocks for the ECU are rather soft compared to standard ones

Posted: **Fri Jun 12, 2015 5:06 am**

Many thanks everybody

Ciao

EFI rubber dampers