Starter motor brush plate and brushes
Starter motor brush plate and brushes
I replaced the starter motor brush plate and pillar with brush for my 750 Paso with identical and available Kawasaki parts.
Kawasaki ZX750 (1996-2003) and ZX900 (1994-1997) use the same parts. Two parts numbers are required:
Brush plate with one brush attached: 14079-2055
Pillar with one brush attached: 21169-1058
Kawasaki ZX750 (1996-2003) and ZX900 (1994-1997) use the same parts. Two parts numbers are required:
Brush plate with one brush attached: 14079-2055
Pillar with one brush attached: 21169-1058
-
- paso grand pooh-bah
- Posts: 1527
- Joined: Thu Jun 21, 2007 12:00 am
- model: 907 I.E.
- year: 1991
- Location: Gothenburg, SWEDEN
Re: Starter motor brush plate and brushes
Good tip, thx f sharing!
Gert
907 I.E. -91
M900 -97
MTS 1100s -07
907 I.E. -91
M900 -97
MTS 1100s -07
- ducapaso
- paso grand pooh-bah
- Posts: 1097
- Joined: Sun Aug 01, 2004 12:00 am
- model: 750 Paso
- year: 1988
- Location: siena, italy
- Contact:
Re: Starter motor brush plate and brushes
Good tip, anyhow brushes are still available in duc dealers
have a nice ride, Nicola
Black "DUKE" 751582
ex...Red "smooth" 753349
Black "DUKE" 751582
ex...Red "smooth" 753349
-
- paso grand pooh-bah
- Posts: 1873
- Joined: Wed Dec 05, 2007 12:35 am
- model: 906 Paso
- year: 1990
- Location: Newzealand
Re: Starter motor brush plate and brushes
I needed new brushes for my 900ss (1997) and baulked at paying nz$80 for the parts so I went to the local auto sparky and got a pack of 4 brushes for 12 bucks . Each brush needed a swipe with a file to fit and a small soldering job to fit to the brush plate. Most auto sparkies can also supply a suitable regulator / rectifyer at a good price . I hate to state the bleedin obvious but it is important to make sure that the starter motor is waterproofed upon re assembly
I wish I was young again............Id be heaps smarter than last time
- DonaldoDuck
- Posts: 80
- Joined: Thu Jun 02, 2005 12:00 am
- model: 907 I.E.
- year: 1992
- Location: Ft. Wayne, Indiana
Re: Starter motor brush plate and brushes
This is great info! Thanks!
1992 907ie Beauty. Custom high pipes, Pro Italia chip, Barnett performance clutch, Corbin Seat, Stainless brake lines. 35,000 miles. Owned since 1993.
Re: Starter motor brush plate and brushes
Great tip, let's keep them coming! We all know that the parts for our Paso's are becoming more and more rare.
-
- Posts: 101
- Joined: Mon Mar 21, 2005 12:00 am
- model: 750 Paso
- year: 1986
- Location: Sydney Australia
Re: Starter motor brush plate and brushes
i replaced my starter motor from a 96 ss the starter motor i believe is the same even up to the ST2 and ST4 models.
Ducati ST2 2002 , Ducati 696 2010 , Ducati Pantah 1983 (in progress )
- persempre907
- paso grand pooh-bah
- Posts: 3312
- Joined: Tue Dec 06, 2005 12:00 am
- model: 907 I.E.
- year: 1992
- Location: Roma, Italia
Re: Starter motor brush plate and brushes
i'd put that in the FAQ.
Ciao
Ciao
Francesco
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
-
- Posts: 101
- Joined: Mon Mar 21, 2005 12:00 am
- model: 750 Paso
- year: 1986
- Location: Sydney Australia
Re: Starter motor brush plate and brushes
Hi all.
just checked my ST2 2002 and starter motor has same part no.128000-6050
just checked my ST2 2002 and starter motor has same part no.128000-6050
Ducati ST2 2002 , Ducati 696 2010 , Ducati Pantah 1983 (in progress )
-
- Posts: 116
- Joined: Tue Jan 16, 2007 12:00 am
- model: 906 Paso
- year: 1991
- Location: UK
Re: Starter motor brush plate and brushes
Is the round graphite bush that supports the armature available too???
-
- Posts: 101
- Joined: Mon Mar 21, 2005 12:00 am
- model: 750 Paso
- year: 1986
- Location: Sydney Australia
Re: Starter motor brush plate and brushes
you would have to check with your local dealer but if the brush plate is available you would assume the bush would be too.
Ducati ST2 2002 , Ducati 696 2010 , Ducati Pantah 1983 (in progress )
-
- Posts: 116
- Joined: Tue Jan 16, 2007 12:00 am
- model: 906 Paso
- year: 1991
- Location: UK
Re: Starter motor brush plate and brushes
already checked, brushes are not available here in the UK..I have replaced the starter with a 748 one, same part number, just would like to repair the old one as a spare....
-
- Posts: 101
- Joined: Mon Mar 21, 2005 12:00 am
- model: 750 Paso
- year: 1986
- Location: Sydney Australia
Re: Starter motor brush plate and brushes
look up "GOWANLOCH" they are in Sydney Australia. They have a lot of little odds and sods , they may have one.
Ducati ST2 2002 , Ducati 696 2010 , Ducati Pantah 1983 (in progress )
- Mustang505
- Posts: 134
- Joined: Wed Jan 28, 2009 9:27 pm
- model: 750 Sport
- year: 1988
- Location: Auckland, New Zealand
Re: Starter motor brush plate and brushes
just to add to this list of info for starter brushes
I have just bought Honda parts that fit - turns out the starter motor used on the Paso & Sport is a Japanese one so parts fairly common.
Honda part numbers for the brushes are:
31201-HA0-004
31231-ZA1-003
I paid $NZ63.00 for both.
I have just bought Honda parts that fit - turns out the starter motor used on the Paso & Sport is a Japanese one so parts fairly common.
Honda part numbers for the brushes are:
31201-HA0-004
31231-ZA1-003
I paid $NZ63.00 for both.
Cheers
Clive
Clive
-
- paso grand pooh-bah
- Posts: 1873
- Joined: Wed Dec 05, 2007 12:35 am
- model: 906 Paso
- year: 1990
- Location: Newzealand
Re: Starter motor brush plate and brushes
12 bucks
I wish I was young again............Id be heaps smarter than last time