Starter motor brush plate and brushes

redmidget · Post by **redmidget** » Sun Jun 29, 2008 4:21 pm

I replaced the starter motor brush plate and pillar with brush for my 750 Paso with identical and available Kawasaki parts.

Kawasaki ZX750 (1996-2003) and ZX900 (1994-1997) use the same parts. Two parts numbers are required:

Brush plate with one brush attached: 14079-2055
Pillar with one brush attached: 21169-1058

Tamburinifan · Post by **Tamburinifan** » Mon Jun 30, 2008 12:05 am

Good tip, thx f sharing!

ducapaso · Post by **ducapaso** » Tue Jul 01, 2008 1:54 pm

Good tip, anyhow brushes are still available in duc dealers

Mc tool · Post by **Mc tool** » Tue Jul 01, 2008 8:23 pm

I needed new brushes for my 900ss (1997) and baulked at paying nz$80 for the parts so I went to the local auto sparky and got a pack of 4 brushes for 12 bucks . Each brush needed a swipe with a file to fit and a small soldering job to fit to the brush plate. Most auto sparkies can also supply a suitable regulator / rectifyer at a good price . I hate to state the bleedin obvious but it is important to make sure that the starter motor is waterproofed upon re assembly

DonaldoDuck · Post by **DonaldoDuck** » Wed Jul 02, 2008 5:09 pm

This is great info! Thanks!

Debonair · Post by **Debonair** » Sat Jul 05, 2008 11:28 pm

Great tip, let's keep them coming! We all know that the parts for our Paso's are becoming more and more rare.

Rodney · Post by **Rodney** » Sun Jul 06, 2008 2:07 am

i replaced my starter motor from a 96 ss the starter motor i believe is the same even up to the ST2 and ST4 models.

persempre907 · Post by **persempre907** » Tue Jul 08, 2008 10:30 am

i'd put that in the FAQ.
Ciao

Rodney · Post by **Rodney** » Wed Jul 09, 2008 7:17 am

Hi all.
just checked my ST2 2002 and starter motor has same part no.128000-6050

ducatipete · Post by **ducatipete** » Fri Aug 08, 2008 9:34 pm

Is the round graphite bush that supports the armature available too???

Rodney · Post by **Rodney** » Sat Aug 09, 2008 7:07 am

you would have to check with your local dealer but if the brush plate is available you would assume the bush would be too.

ducatipete · Post by **ducatipete** » Sat Aug 09, 2008 7:13 am

already checked, brushes are not available here in the UK..I have replaced the starter with a 748 one, same part number, just would like to repair the old one as a spare....

Rodney · Post by **Rodney** » Sat Aug 09, 2008 8:00 am

look up "GOWANLOCH" they are in Sydney Australia. They have a lot of little odds and sods , they may have one.

Mustang505 · Post by **Mustang505** » Thu Jul 29, 2010 4:25 am

just to add to this list of info for starter brushes
I have just bought Honda parts that fit - turns out the starter motor used on the Paso & Sport is a Japanese one so parts fairly common.
Honda part numbers for the brushes are:
31201-HA0-004
31231-ZA1-003
I paid $NZ63.00 for both.

Mc tool · Post by **Mc tool** » Thu Jul 29, 2010 8:48 am

12 bucks

Starter motor brush plate and brushes

Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes

Re: Starter motor brush plate and brushes