Front Discs

Mustang505 · Post by **Mustang505** » Tue Dec 14, 2010 5:55 am

Hi
does any know where you can get replacment front discs that bolt on to the oscam 16" wheel.

persempre907 · Post by **persempre907** » Tue Dec 14, 2010 5:59 am

Hi Clive,
here there's a solution
http://www.excellence-international.com ... 7h0t84oos2
Ciao

Mustang505 · Post by **Mustang505** » Wed Dec 15, 2010 2:41 am

Thanks Francesco
WOW - those look really cool. I just bought some 4 piston Brembo calipers and with these discs would look fantastic. I think I'm due a really cool Christmas present for once!!

persempre907 · Post by **persempre907** » Wed Dec 15, 2010 12:24 pm

So, happy Christmas

Ciao

JWilliam · Post by **JWilliam** » Wed Dec 22, 2010 9:00 pm

The standard cast iron front discs (750 & 906) are prone to cracking so they must be checked over periodically. What are these new discs made from, is it Cast Iron again? With the lack of vent holes I am guessing it is.

Mustang505 · Post by **Mustang505** » Wed Dec 22, 2010 9:07 pm

My guess is that they are made of stainless, but i'll see when they arrive. who still makes cast iron discs today? I've since found that EBC also make replacement discs for the paso/sport.

Post by **paso750** » Thu Dec 23, 2010 11:13 am

they are stainless steel.
the EBC number is MD630LS & MD630RS (left and right). The rear is MD631

I didn`t know EBC still makes them.

G.

Duc750 · Post by **Duc750** » Thu Dec 23, 2010 4:01 pm

EBC have a high Stainless content - they stop ok though but they seem to have designed a disc that is rubbish with anything but their own pads !
I've used them for years on a variety of bikes

Mustang505 · Post by **Mustang505** » Fri Dec 24, 2010 12:50 am

Does anyone know what the EBC discs cost?

Post by **paso750** » Fri Dec 24, 2010 9:19 am

just copying "MD630LS" into Google shows i.e. $228ea. in a US shop or 230GBP (the pair) in a UK shop (which is a lot less). Guess it`s worth do do some searching and comparing prices.

G.

Hans · Post by **Hans** » Sat Dec 25, 2010 11:54 am

Hey all
Why not look at this option, fairly cheap, look like original setup from Germany. 139,80 Euro /disc, front and 109,77 Euro / disc rear.

http://www.unmuessig-moto-italia.de/DUC ... .43.0.html

Greetings from a snowy Sweden
Hans

Finnpaso · Post by **Finnpaso** » Sat Dec 25, 2010 8:30 pm

Nice to see one new "neibourhood" here....

from snowy Sweden

persempre907 · Post by **persempre907** » Sat Dec 25, 2010 9:10 pm

What's the manufacturer?
I would never fit a brakes' component from an unknown manufacturer.
Ciao

Post by **paso750** » Sun Dec 26, 2010 9:35 am

those are the original ones

Hans · Post by **Hans** » Sun Dec 26, 2010 10:23 am

Hi all
I think you're right there -looks like original ones. You can ask them if you want to know more.

finnpaso -I think I will shovel some more snow from my showroom where I keep my Hailwood Replica, 750 Paso, R 100 RS and Superglide. There's 'bout 750 cm snow at the most on that roof. Then I think I will continue restoring M1R fork to my 906. I had a plan to finish the restoring of my latest paso ( 906 ) before christmas but have been occupied with snow for about a week now.
The i probably will drink huge amounts of GLÖGG ( spiced up Wine with a touch of booze and heated up )
Happy new paso year to ya all.
Hans

Front Discs

Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs

Re: Front Discs