New 907ie paso owner

[vainika]

Hello
I just bought a 907ie project for myself.
I was thinking of updating here how the project is going.
Here's a picture of the condition of the bike for this moment.

[Nito]

907 streetfighter looks very cool

[vainika]

907 streetfighter looks very cool

I don’t like streetfighter look
Luckily I have all fairing parts

[Nito]

It looks a fun project, look forward to watching this progress

[ccmman]

Hi Vainika
looking forward to hearing your progress. Post lots of pictures, and plenty of detail about what you are doing.
So the engine is out, are you doing a complete strip and re-build?
Any problems with electrics?
My fuel pump in the tank was shot, they are available cheaply from other sources. I found mine on Gumtree (local version of ebay), for £25. It was a brand new spare for a Mazda MX5, which owner had sold.

Good luck and have fun!

[vainika]

Hi Vainika
looking forward to hearing your progress. Post lots of pictures, and plenty of detail about what you are doing.
So the engine is out, are you doing a complete strip and re-build?
Any problems with electrics?
My fuel pump in the tank was shot, they are available cheaply from other sources. I found mine on Gumtree (local version of ebay), for £25. It was a brand new spare for a Mazda MX5, which owner had sold.

Good luck and have fun!

HI
Thanks
I for updating here whenever progress is made.
I was thinking to do a full overhauling for the bike.

The previous owner has dismantled the engine and started the rebuild it and has installed the H-Profile connecting rods and
have also made a vertical cylinder oil cooling with Kämna instructions.

I have gone through the parts and start made a list of the missing parts.

[Sergio Desmo]

I see nothing missing on your picture. Passion, winter project, shite, it is July now

have fun putting back the babe together and hope to see progresses soon

[vainika]

Hello!

little progress for my the summer winter project

In Finland, we have a saying in the summer is short but little snowy

I dismantled bike little more, But a frontend still need to be dismantled before I can paint the frame.

Here are a few pictures

[Derek]

Pics are not showing!

[vainika]

Pics are not showing!

The images are fixed

[Derek]

Yes, I can see the pictures now. I think I need to do something similar to my bike, the bodywork is immaculate but the frame underneath is beginning to look a bit scabby. Maybe next year

[vainika]

Hello

Now the whole bike is dismantled.
Waiting for washing and painting preparations.

[vainika]

Hello

I have problem to solve how to mount ECM on the bike

Have anybody so gaintly can take a picture for me under the seat how the ECU have mounted?

Thank you very much in advance!

[englishstiv]

On the 907ie the ECU sits on 3 small rubber bushes beneath the rear part of the seat just in front of the rear seat inner nacelle.

If you look at the frame you should see two lugs on the inner frame carrier and one in the middle directly opposite on the other frame carrier. the electric cable connects to the right side of your bike ( sitting on it )

Best thing is download the online manual in the 907ie Tech FAQ.

Looking at your Fame photo's I would be interested to confirm your frame number as it may be a 906 frame if you can't locate those lugs? Again check on the Tech FAQ for all the Paso model and 907ie numbers. Does your tank have an internal fuel pump fitted?

[vainika]

On the 907ie the ECU sits on 3 small rubber bushes beneath the rear part of the seat just in front of the rear seat inner nacelle.

If you look at the frame you should see two lugs on the inner frame carrier and one in the middle directly opposite on the other frame carrier. the electric cable connects to the right side of your bike ( sitting on it )

Best thing is download the online manual in the 907ie Tech FAQ.

Looking at your Fame photo's I would be interested to confirm your frame number as it may be a 906 frame if you can't locate those lugs? Again check on the Tech FAQ for all the Paso model and 907ie numbers. Does your tank have an internal fuel pump fitted?

Thank you
I found attachment points from the from frame.